PEEK GF30

PEEK GF30 is a 30% glass fiber reinforced high-performance polymer that offers significantly higher stiffness and creep resistance than unfilled PEEK. By incorporating glass fibers, the material's thermal expansion is drastically reduced, and its heat deflection temperature is significantly increased, making it ideal for structural applications under heavy loads at high temperatures. Jucheng Precision excels in the CNC machining of this abrasive material, utilizing specialized diamond-coated tooling and rigid 5-axis setups. We deliver precision-engineered PEEK GF30 components for the aerospace, industrial, and energy sectors, ensuring exceptional dimensional stability and mechanical reliability.

Zurück zu Materialien Angebot anfordern

PEEK GF30 Machining Capabilities

Kapazität	Technische Beschreibung	Jucheng-Vorteil
Verschleißfestes Fräsen	PEEK GF30 is highly abrasive to tools. We use specialized diamond-coated (CVD) or sub-micrograin carbide cutters to maintain edge sharpness.	Our tooling strategy ensures consistent tolerances across long production runs, preventing the “size drift” common when glass fibers wear down standard tools.
Tight-Tolerance Machining	Achieving +/- 0.02mm tolerances on rigid structural housings and connectors.	The added glass fiber reduces thermal expansion, allowing us to hold tighter dimensions than virgin PEEK, even in varying workshop temperatures.
5-Axis Structural Milling	Machining complex aerospace brackets and engine-zone insulators with intricate geometries.	Our rigid Haas/Mazak machines handle the high-modulus material with zero vibration, delivering superior surface integrity and crisp features.
Deburring & Edge Finishing	Cryogenic deburring and manual micro-deburring under high magnification.	Glass-filled plastics produce stubborn burrs. Jucheng ensures every part is 100% burr-free, essential for high-voltage and aerospace safety.

Fabrication Guidelines for PEEK GF30

Werkzeugverschleißmanagement:
The 30% glass fiber content is extremely abrasive. Tipp: We monitor tool life strictly and use automated tool-length sensors to compensate for wear, ensuring every part in the batch is identical.

Fiber Orientation Awareness:
The strength of GF30 is non-isotropic (stronger along the fiber direction). Tipp: We source high-quality extruded stock with uniform fiber distribution to prevent warping and ensure predictable mechanical strength.

Surface Finish Limitations:
Due to the glass fibers, GF30 will not achieve the same “mirror” finish as virgin PEEK. Tipp: It naturally produces a matte finish. If a smoother surface is required, we can perform specialized buffing, though the matte look is standard for this grade.

Kühlmittelstrategie:
Water-based flood coolant is used to wash away abrasive glass dust and keep the cutting zone cool, preventing tool overheating and material discoloration.

Hauptanwendungen

Luft- und Raumfahrt & Verteidigung
Structural airframe components, electrical housings, and engine-zone standoff insulators requiring high stiffness and flame resistance.

Öl & Gas
High-pressure backup rings, valve seats, and electrical connectors for downhole tools operating in extreme temperatures and pressures.

Industriemaschinen
Wear strips, guide rails, and structural bushings where high load-bearing capacity and dimensional stability are required.

Elektrik & Elektronik
High-voltage insulators and semiconductor wafer handling tools that must maintain their shape under thermal cycling.

Eigenschaften

Dichte	1.49 - 1.53 g/cm³
Zugfestigkeit	150 - 165 MPa
Elastizitätsmodul	10 - 12 GPa
Härte	88 Shore D
Wärmeformbeständigkeitstemperatur	315 °C
Dauereinsatztemperatur	250 °C
Wasseraufnahme	0.10%
Durchschlagfestigkeit	18 - 20 kV/mm
Zerspanbarkeitsbewertung	Niedrig
Max. Teilegröße	2000 x 800 x 600 mm