Articoli tecnici approfonditi, confronti tra materiali, approfondimenti sulla lavorazione CNC e guide alla risoluzione dei problemi dal team di ingegneria Jucheng.
15 ottobre 2026
Soft jaws can solve a very specific problem: gripping a repeat part on a surface that standard hardened jaws cannot support well. A machined pocket or contour can increase contact…
Leggi l'articolo completo
15 ottobre 2026
Choosing a CNC workholding method is not a hardware preference; it is a decision about what must stay fixed, what…
14 ottobre 2026
A fixture can be rigid and repeatable yet still locate the part from the wrong reference. The central question in…
14 ottobre 2026
CNC machining design guidelines are most useful when they explain the tradeoff behind a feature, not when they present a…
14 ottobre 2026
There is no universal minimum order quantity for CNC machining. A supplier may accept a single custom part, while a…
14 ottobre 2026
A CNC machining lead time is the calendar interval from a usable order release to the point when conforming parts…
13 ottobre 2026
Nylon and PTFE are both used in low-friction or wear-related components, but “low friction” does not settle the choice. Nylon…
13 ottobre 2026
PEEK and Ultem (PEI) are often shortlisted for demanding CNC-machined plastic parts, but selecting the polymer by a headline temperature…
13 ottobre 2026
Delrin (acetal) and nylon can both serve as CNC-machined engineering plastics, but a fit that works in dry storage may…
13 ottobre 2026
Polycarbonate and acrylic can both be transparent, CNC-machinable plastics, but they solve different design problems. Polycarbonate is often considered where…
