In-depth technical articles, material comparisons, CNC machining insights, and problem-solving guides from the Jucheng engineering team.
October 24, 2026
A bore can measure on size and still fail its function. The axis may be tapered, lobed, misaligned, or too rough for the mating shaft or seal. Internal grinding and…
Read Full Article
October 24, 2026
Choose precision grinding when the part needs controlled stock removal, geometry correction, or a ground surface that supports fit. Choose…
October 24, 2026
For a low-volume plastic part, the better route depends less on the process label than on what must be learned…
October 24, 2026
When a filled PEEK part wears cutters faster than expected, the first question is often whether carbon-fiber-reinforced CF30 or glass-fiber-reinforced…
October 23, 2026
C360 and C260 brass solve different manufacturing problems. C360 is widely selected for free-machining behavior in turned components; C260 is…
October 23, 2026
When a stainless part is difficult to turn, 303 can look like an easy answer. Its free-machining characteristics may help…
October 23, 2026
C11000 and C10100 copper are both highly conductive copper grades, but they are not interchangeable just because a drawing says…
October 23, 2026
Compare the complete route, not one cycle A quote comparison should separate material price from conversion cost. A higher raw-stock…
October 22, 2026
A side feature on a turned part does not automatically require a particular lathe axis. The decision between C-axis and…
October 22, 2026
A taper can be present in the program and still miss the intended angle on the part. The discrepancy may…
