In-depth technical articles, material comparisons, CNC machining insights, and problem-solving guides from the Jucheng engineering team.
November 2, 2026
Whether to machine a steel part before or after heat treatment depends on which features must survive distortion, what hardness the cutting operation must face, and whether stock remains for…
Read Full Article
November 2, 2026
ISO 16232 is a road-vehicle standard for determining and documenting particulate contamination on functionally relevant components and systems. For a…
November 2, 2026
Magnesium CNC machining should be planned as both a cutting process and a combustible-metal housekeeping task. The main safety concern…
November 2, 2026
Machining Hastelloy C-276 starts with two separate questions: what corrosive service requires the alloy, and what surfaces must remain acceptable…
November 2, 2026
Inconel 718 machining is governed by the alloy’s condition and the cut’s stability, not by a speed chart alone. The…
October 30, 2026
CNC parts packaging requirements should describe the condition that must reach the receiving dock: which surfaces cannot touch, how parts…
October 30, 2026
CNC part marking requirements should state what identity the part needs to carry, where the mark belongs, how it will…
October 30, 2026
A machined UAV landing-gear bracket is a local load-transfer component: it connects a leg, skid, or shock element to the…
October 29, 2026
A drone propeller adapter should be judged as a rotating interface, not merely as a small aluminum hub. The critical…
October 29, 2026
A wafer transfer arm is not just a shaped plate: it is a locating link in a robot-to-wafer handoff. The…
