{"id":2497,"date":"2026-09-22T18:17:36","date_gmt":"2026-09-22T10:17:36","guid":{"rendered":"https:\/\/www.jccncmachining.com\/?p=2497"},"modified":"2026-09-22T11:16:53","modified_gmt":"2026-09-22T03:16:53","slug":"3-axis-vs-5-axis-machining-cost","status":"publish","type":"post","link":"https:\/\/www.jccncmachining.com\/zh_hk\/blog\/3-axis-vs-5-axis-machining-cost\/","title":{"rendered":"Does 5-Axis Really Cost More Than 3-Axis?"},"content":{"rendered":"<article class=\"cnc-blog-article\">Five-axis machining usually carries a higher machine rate, but that does not mean it produces the higher part cost. A 5-axis route can become less expensive when it replaces several 3-axis setups, reduces custom fixtures, shortens datum transfers, improves tool access, or lowers the inspection and scrap risk of features on multiple faces. For a simple prismatic part, however, 3-axis machining may remain the cleaner and more economical choice.<\/p>\n<div class=\"decision-summary\">\n<p><strong>Decision rule:<\/strong> compare the complete manufacturing route\u2014programming, setups, fixtures, cutting time, tool reach, inspection, and risk\u2014not the hourly machine rate in isolation.<\/p>\n<\/div>\n<nav class=\"article-toc\" aria-label=\"Table of contents\">\n<p class=\"toc-title\"><strong>Route Comparison<\/strong><\/p>\n<ul>\n<li><a href=\"#quote-question\">Start with the right quote question<\/a><\/li>\n<li><a href=\"#route-map\">Map both manufacturing routes<\/a><\/li>\n<li><a href=\"#three-axis-wins\">Recognize when 3-axis wins<\/a><\/li>\n<li><a href=\"#five-axis-wins\">Recognize when 5-axis wins<\/a><\/li>\n<li><a href=\"#three-plus-two\">Separate 3+2 from simultaneous machining<\/a><\/li>\n<li><a href=\"#risk-cost\">Price accuracy and risk<\/a><\/li>\n<li><a href=\"#rfq\">Ask suppliers for comparable routes<\/a><\/li>\n<li><a href=\"#faq\">Resolve common cost questions<\/a><\/li>\n<\/ul>\n<\/nav>\n<section id=\"quote-question\">\n<h2>The Wrong Question Is \u201cWhich Machine Costs More per Hour?\u201d<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-hourly-rate-question-1024x576.webp\" alt=\"hourly-rate-question\" class=\"size-large wp-image-2543 aligncenter\" \/>\nA machine-hour rate reflects equipment, labor, maintenance, utilization, and overhead, but a buyer purchases conforming parts\u2014not machine time. The parent overview of <a href=\"https:\/\/www.jccncmachining.com\/zh_hk\/%e9%83%a8%e8%90%bd%e6%a0%bc\/cnc-machining-cost\/\" srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-hourly-rate-question-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-hourly-rate-question-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-hourly-rate-question-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-hourly-rate-question-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-hourly-rate-question-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-hourly-rate-question-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-hourly-rate-question.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>CNC machining cost<\/a> shows how setup, cycle time, tooling, inspection, finishing, and risk combine in a quotation. Axis count changes several of those cost blocks at the same time.<\/p>\n<p>A 3-axis machine moves the cutting tool along X, Y, and Z. Reaching another side of the workpiece normally requires reorientation or a new setup. A 5-axis machine adds two rotary movements, allowing the tool or workpiece to approach features from additional directions. The cost comparison depends on whether that extra access removes enough work elsewhere in the route.<\/p>\n<table>\n<thead>\n<tr>\n<th>Cost question<\/th>\n<th>3-axis route<\/th>\n<th>5-axis route<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>How many orientations?<\/td>\n<td>May require several manual setups<\/td>\n<td>May combine faces in one setup<\/td>\n<\/tr>\n<tr>\n<td>What workholding is needed?<\/td>\n<td>Simple vise work or multiple fixtures<\/td>\n<td>More specialized initial workholding<\/td>\n<\/tr>\n<tr>\n<td>How are datums transferred?<\/td>\n<td>Re-established after reorientation<\/td>\n<td>More relationships can remain in one coordinate system<\/td>\n<\/tr>\n<tr>\n<td>What tool reach is required?<\/td>\n<td>Long tools may be needed for angled access<\/td>\n<td>Tool can approach closer to the normal direction<\/td>\n<\/tr>\n<tr>\n<td>How complex is programming?<\/td>\n<td>Simpler toolpaths, more setup planning<\/td>\n<td>More complex simulation and collision control<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/section>\n<section id=\"route-map\">\n<h2>Put the Same Part Through Two Route Maps<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-2-route-maps-1024x576.webp\" alt=\"route-maps\" class=\"size-large wp-image-2536 aligncenter\" \/>\nConsider a housing with a top pocket, side ports, an angled sealing face, and several positional relationships. A 3-axis plan might machine the top, transfer the part to a side fixture, repeat that transfer for another face, and use an angled fixture for the sealing surface. A multi-axis plan might establish one primary datum and reach several features without removing the part.\n\nThat example does not prove that 5-axis is automatically cheaper. The multi-axis route may need more CAM preparation, careful collision simulation, qualified workholding, and machine availability. The comparison becomes useful only when both routes include every operation from raw stock to accepted part.\n\n\n<ol srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-2-route-maps-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-2-route-maps-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-2-route-maps-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-2-route-maps-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-2-route-maps-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-2-route-maps-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-2-route-maps.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>\n<li>List every machined face and feature relationship.<\/li>\n<li>Count required orientations, not merely toolpaths.<\/li>\n<li>Identify fixtures, soft jaws, probing, and datum-transfer steps.<\/li>\n<li>Estimate roughing, finishing, tool-change, and handling time.<\/li>\n<li>Add inspection needed after each critical setup.<\/li>\n<li>Review risk at low quantity and expected production quantity.<\/li>\n<\/ol>\n<p>\u9019\u500b <a href=\"https:\/\/www.jccncmachining.com\/zh_hk\/%e9%83%a8%e8%90%bd%e6%a0%bc\/cnc-milling-process\/\">CNC milling process<\/a> guide provides broader process context. Here the decision is narrower: which route produces the required relationships with the least total work and uncertainty?<\/p>\n<h3>Quantity can reverse the answer<\/h3>\n<p>At one or ten parts, avoiding several dedicated fixtures may make a flexible 5-axis setup attractive. At hundreds or thousands of parts, repeatable workholding, pallet loading, cycle balancing, and available spindle capacity may favor a different route. The correct comparison uses the buyer\u2019s release quantity and repeat-order pattern\u2014not an assumed annual volume that may never be ordered.<\/p>\n<p>Revision maturity matters too. A prototype that is still changing benefits from adaptable workholding. A stable production design may justify purpose-built fixtures and a carefully optimized 3-axis sequence. Buyers should therefore request quantity breaks without assuming the same process will remain optimal at every volume.<\/p>\n<\/section>\n<section id=\"three-axis-wins\">\n<h2>3-Axis Wins When Extra Motion Does Not Remove Extra Work<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-three-axis-wins-1024x576.webp\" alt=\"three-axis-wins\" class=\"size-large wp-image-2537 aligncenter\" \/>\nSimple plates, brackets, spacers, covers, and parts dominated by features on one accessible side often suit 3-axis machining. Standard vises and familiar cutters keep programming, setup, and proving straightforward. If a second side only needs a simple flip, the additional orientation may cost less than assigning a more advanced machine.\n\nThree-axis can also be attractive when production uses stable dedicated fixtures. A repeat batch may justify workholding that locates the part quickly and consistently. Once that route is proven, moving it to another machine solely to reduce setup count may not improve total cost.\n\n\n<h3 srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-three-axis-wins-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-three-axis-wins-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-three-axis-wins-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-three-axis-wins-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-three-axis-wins-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-three-axis-wins-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-three-axis-wins.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>Signals that favor a 3-axis quotation<\/h3>\n<ul>\n<li>Most features are reachable from one direction.<\/li>\n<li>Secondary faces have generous positional relationships.<\/li>\n<li>The geometry accepts short standard tools.<\/li>\n<li>Workholding is simple and repeatable.<\/li>\n<li>The quantity supports a proven fixture or pallet strategy.<\/li>\n<li>No undercuts or continuously changing tool orientations are required.<\/li>\n<\/ul>\n<\/section>\n<section id=\"five-axis-wins\">\n<h2>5-Axis Wins When Access and Relationships Dominate the Job<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-4-five-axis-wins-1024x576.webp\" alt=\"five-axis-wins\" class=\"size-large wp-image-2538 aligncenter\" \/>\nMulti-face parts, angled holes, impeller-like surfaces, compound contours, and features with tight relationships across orientations can benefit from 5-axis access. Fewer removals from the fixture can reduce handling and the accumulation of location error. Tilting the workpiece or tool can also permit shorter, stiffer cutters, which may improve surface consistency and reduce deflection on deep or angled features.\n\nA 5-axis route can be especially valuable at prototype and low-volume quantities because there may be too few parts to amortize several custom fixtures. One adaptable setup can replace the design, manufacture, and proving of dedicated workholding. At higher quantities, the answer can change: a fast 3-axis cell with optimized fixtures may outperform a flexible multi-axis route.\n\nThe site\u2019s <a href=\"https:\/\/www.jccncmachining.com\/zh_hk\/capabilities\/cnc-milling\/5-axis-milling\/\" srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-4-five-axis-wins-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-4-five-axis-wins-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-4-five-axis-wins-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-4-five-axis-wins-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-4-five-axis-wins-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-4-five-axis-wins-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-4-five-axis-wins.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>5-axis milling capability<\/a> page explains the process offering. A quote should still justify why the selected route fits the individual geometry rather than using axis count as a blanket quality label.<\/p>\n<h3>Tool orientation can affect more than cycle time<\/h3>\n<p>Approaching a surface closer to its normal direction can allow a shorter tool, improve chip evacuation, reduce holder interference, and provide a more consistent contact condition. These advantages may reduce finishing passes or hand blending on complex surfaces. They are valuable only when the final surface and dimensional requirements need them; using 5-axis motion on generous geometry may add programming effort without changing acceptance.<\/p>\n<\/section>\n<section id=\"three-plus-two\">\n<h2>Do Not Confuse 3+2 Positioning with Simultaneous 5-Axis Cutting<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-three-plus-two-1024x576.webp\" alt=\"three-plus-two\" class=\"size-large wp-image-2539 aligncenter\" \/>\nMany parts called \u201c5-axis\u201d do not require all axes to move during the cut. In 3+2 positional machining, rotary axes orient the part, lock it at an angle, and allow conventional three-axis cutting from that direction. This can combine faces and improve access without the programming and motion demands of simultaneous machining.\n\nSimultaneous 5-axis motion is appropriate when the cutter orientation must change continuously along a complex surface, when tool contact needs close control, or when geometry cannot be produced through indexed positions alone. Specifying simultaneous machining for a part that only needs indexed access can narrow the supplier pool without improving the result.\n\n\n<table srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-three-plus-two-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-three-plus-two-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-three-plus-two-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-three-plus-two-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-three-plus-two-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-three-plus-two-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-three-plus-two.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>\n<thead>\n<tr>\n<th>Route<\/th>\n<th>Best fit<\/th>\n<th>Cost caution<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>3-axis<\/td>\n<td>Accessible prismatic geometry and simple flips<\/td>\n<td>Setup count can grow with multi-face features<\/td>\n<\/tr>\n<tr>\n<td>3+2 positional<\/td>\n<td>Several angled faces or holes without continuous rotary cutting<\/td>\n<td>Still requires orientation planning and collision clearance<\/td>\n<\/tr>\n<tr>\n<td>Simultaneous 5-axis<\/td>\n<td>Complex surfaces and continuously changing tool orientation<\/td>\n<td>Programming, simulation, and proving must be justified<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/section>\n<section id=\"risk-cost\">\n<h2>The Cheapest Route Must Still Control Accuracy and Scrap Risk<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-risk-cost-1024x576.webp\" alt=\"risk-cost\" class=\"size-large wp-image-2540 aligncenter\" \/>\nEach time a part is unclamped and re-established, variation can enter through locating surfaces, debris, clamping force, fixture condition, and datum pickup. That does not make multi-setup machining unreliable; well-designed fixtures and inspection can control it. It does mean the quote should account for how critical relationships survive the transfer.\n\nFive-axis machining introduces different risks. Rotary-axis calibration, tool-center-point control, collision clearance, post-processing, probing strategy, and operator experience all matter. A single-setup claim is only valuable when the machine, program, and inspection plan can verify the required result.\n\nThe appropriate <a href=\"https:\/\/www.jccncmachining.com\/zh_hk\/about\/quality\/\" srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-risk-cost-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-risk-cost-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-risk-cost-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-risk-cost-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-risk-cost-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-risk-cost-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-risk-cost.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>quality control workflow<\/a> should follow the chosen route. Multi-face positional relationships may need in-process probing or CMM verification, while simpler parts may be efficiently accepted with dedicated gauges and standard dimensional checks.<\/p>\n<h3>One setup does not mean one operation<\/h3>\n<p>Marketing descriptions sometimes treat \u201csingle setup\u201d as though the entire part emerges complete without interruption. In practice, the route can still include probing, roughing, semi-finishing, tool changes, deburring, a second operation for the clamped face, and final inspection. The benefit is that selected critical features stay related within one controlled orientation\u2014not that all manufacturing work disappears.<\/p>\n<p>Likewise, several 3-axis setups are not automatically a defect. If locating surfaces are robust, fixtures are proven, and the critical relationships tolerate the transfers, multiple operations may be predictable and economical. The quotation should expose these assumptions so the buyer can distinguish a capable route from an optimistic one.<\/p>\n<\/section>\n<section id=\"rfq\">\n<h2>Ask for a Route Explanation, Not a Preferred Axis Count<\/h2>\n<p>A buyer can unintentionally inflate cost by requiring 5-axis machining in the RFQ when the drawing only needs a conforming part. Unless the process itself is controlled for a validated reason, specify function, material, critical characteristics, finish, quantity, and inspection evidence. Let qualified suppliers propose the route.<\/p>\n<p>When quotes use different equipment, request enough information to normalize them:<\/p>\n<ul>\n<li>Number of machining setups and major datum transfers.<\/li>\n<li>Whether the route is 3-axis, indexed 3+2, or simultaneous 5-axis.<\/li>\n<li>One-time fixture or programming charges.<\/li>\n<li>Inspection plan for cross-face and angled relationships.<\/li>\n<li>Quantity assumptions and repeat-order treatment.<\/li>\n<li>Operations performed outside the quoting supplier.<\/li>\n<\/ul>\n<p>Also review the functional requirements in the <a href=\"https:\/\/www.jccncmachining.com\/zh_hk\/%e9%83%a8%e8%90%bd%e6%a0%bc\/cnc-machining-tolerances\/\">CNC machining tolerances<\/a> article before comparing routes. A cost advantage is meaningful only when both suppliers price the same acceptance conditions.<\/p>\n<\/section>\n<section id=\"faq\">\n<h2>3-Axis and 5-Axis Cost Questions<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-axis-faq-1024x576.webp\" alt=\"axis-faq\" class=\"size-large wp-image-2541 aligncenter\" srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-axis-faq-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-axis-faq-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-axis-faq-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-axis-faq-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-axis-faq-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-axis-faq-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-axis-faq.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/p>\n<h3>Is 5-axis machining always more expensive?<\/h3>\n<p>No. Its machine rate may be higher, but fewer setups, fixtures, datum transfers, and long-tool operations can reduce total part cost for suitable geometry.<\/p>\n<h3>Is 3-axis better for simple parts?<\/h3>\n<p>Often. If features are accessible with simple workholding and one or two orientations, 3-axis machining can provide the most direct route.<\/p>\n<h3>Does every multi-face part need simultaneous 5-axis machining?<\/h3>\n<p>No. Indexed 3+2 machining may orient the part to several faces while cutting with conventional three-axis motion.<\/p>\n<h3>Why can fewer setups improve cost?<\/h3>\n<p>They can reduce handling, fixture preparation, datum recovery, in-process checks, and the risk associated with transferring critical relationships.<\/p>\n<h3>Should the drawing specify the machine axis count?<\/h3>\n<p>Only when a controlled process requirement makes it necessary. Otherwise specify the functional result and let the supplier propose a capable manufacturing route.<\/p>\n<\/section>\n<\/article>","protected":false},"excerpt":{"rendered":"<p>Five-axis machining usually carries a higher machine rate, but that does not mean it produces the higher part cost. A 5-axis route can become less expensive when it replaces several 3-axis setups, reduces custom fixtures, shortens datum transfers, improves tool access, or lowers the inspection and scrap risk of features on multiple faces. For a [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":2542,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-2497","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"_links":{"self":[{"href":"https:\/\/www.jccncmachining.com\/zh_hk\/wp-json\/wp\/v2\/posts\/2497","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.jccncmachining.com\/zh_hk\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.jccncmachining.com\/zh_hk\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.jccncmachining.com\/zh_hk\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.jccncmachining.com\/zh_hk\/wp-json\/wp\/v2\/comments?post=2497"}],"version-history":[{"count":10,"href":"https:\/\/www.jccncmachining.com\/zh_hk\/wp-json\/wp\/v2\/posts\/2497\/revisions"}],"predecessor-version":[{"id":2544,"href":"https:\/\/www.jccncmachining.com\/zh_hk\/wp-json\/wp\/v2\/posts\/2497\/revisions\/2544"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.jccncmachining.com\/zh_hk\/wp-json\/wp\/v2\/media\/2542"}],"wp:attachment":[{"href":"https:\/\/www.jccncmachining.com\/zh_hk\/wp-json\/wp\/v2\/media?parent=2497"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.jccncmachining.com\/zh_hk\/wp-json\/wp\/v2\/categories?post=2497"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.jccncmachining.com\/zh_hk\/wp-json\/wp\/v2\/tags?post=2497"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}