PTFE Virgem

Virgin PTFE (Polytetrafluoroethylene) is the highest purity grade of Teflon, renowned for its near-universal chemical resistance and the lowest coefficient of friction of any solid material. Capable of operating from -200°C to +260°C, it is an essential material for high-performance seals, medical fluidics, and electrical insulators. Jucheng Precision specializes in the precision CNC machining of this exceptionally soft polymer, utilizing ultra-sharp tooling and specialized workholding to overcome challenges like material creep and high thermal expansion. Whether you need complex gas-tight seals or FDA-compliant medical manifolds, our expertise ensures your PTFE parts are delivered with burr-free edges and the precise dimensions required for critical industrial assemblies.

Voltar aos Materiais Solicitar um Orçamento
PTFE Virgem

Variantes de Material PTFE / Teflon

Grau Nome Comum Características Principais Aplicações Típicas
PTFE Virgem Grau Elétrico 99.9% Pure. Lowest friction, highest chemical resistance, and best dielectric properties. FDA compliant. Chemical seals, medical components, laboratory fluidics, electrical insulators.
PTFE Mecânico PTFE Reprocessado Contains recycled material. Lower cost but reduced mechanical and electrical properties. Not for food use. Espaçadores não críticos, arruelas, pastilhas de desgaste.
PTFE com Carga de Vidro 15% / 25% GF PTFE Reinforced with glass fibers to reduce “cold flow” (creep) and improve compressive strength. Valve seats, gaskets, high-pressure bearings.
PTFE com enchimento de bronze Grau Rolamento Added bronze powder for superior wear resistance and thermal conductivity. Best for heavy loads. Hydraulic cylinder guides, dynamic seals, slider plates.

Virgin PTFE Machining Capabilities

Capacidade Descrição Técnica Vantagem Jucheng
Precision Seal Turning Machining intricate lip profiles and fine grooves for high-performance hydraulic and pneumatic seals. We achieve burr-free edges and Ra 0.4μm finishes directly off the tool, critical for gas-tight and vacuum-tight sealing integrity.
Thin-Wall Sleeve Machining Boring and turning thin-walled PTFE liners and sleeves (down to 0.5mm) without material tearing. Using specialized air-chucks and internal mandrels, we prevent the deformation of the soft PTFE, ensuring perfect concentricity.
Zero-Burr Micro-Drilling Drilling micro-channels in PTFE blocks for laboratory fluidic manifolds and chemical analyzers. Our ultra-sharp micro-tooling ensures internal channels are smooth and free of the stringy burrs common when machining soft Teflon.
Dimensional Stability Control Managing the high thermal expansion of PTFE during the machining process to hold tight tolerances. We machine in a climate-controlled facility and utilize specific “dwell periods” to ensure the part reaches thermal equilibrium before final sizing.

Fabrication Guidelines for Virgin PTFE

Sensibilidade à Fixação:
PTFE is extremely soft and prone to “cold flow” (permanent deformation under pressure). Dica: We use custom soft jaws that encapsulate the part or vacuum workholding to prevent clamping marks and geometry distortion.

Thermal Expansion Awareness:
PTFE has a massive coefficient of thermal expansion and undergoes a phase change at 19°C. Dica: We maintain a stable 20°C environment for machining and inspection to ensure dimensions remain consistent from our factory to your assembly line.

Estratégia de Ferramentas Afiadas:
Dull tools will push and smear the material rather than cut it. Dica: We use high-rake, polished uncoated carbide tools. This ensures the PTFE is sheared cleanly, resulting in the best possible surface finish and dimensional accuracy.

Alívio de Tensões:
Large PTFE billets often contain internal stress from the extrusion process. Dica: We perform roughing passes followed by a stabilizing period to allow the material to “relax” before performing final critical finish passes.

Aplicações Principais

Chemical & Fluid Handling
Valve seats, pump diaphragms, and gaskets that require near-universal chemical r

Propriedades

Densidade 2.14 - 2.18 g/cm³
Resistência à Tração 20 - 35 MPa
Coeficiente de Atrito 0.05 - 0.10
Dureza 55 - 65 Shore D
Alongamento na Ruptura 250 - 450%
Condutividade Térmica 0,25 W/m-K
Temperatura de Serviço Contínuo -200 a +260 °C
Absorção de Água < 0,01%
Rigidez Dielétrica 20 - 60 kV/mm
Classificação de Maquinabilidade Moderado
Tamanho Máx. da Peça 2000 x 800 x 600 mm