{"id":2636,"date":"2026-10-05T10:38:14","date_gmt":"2026-10-05T02:38:14","guid":{"rendered":"https:\/\/www.jccncmachining.com\/?p=2636"},"modified":"2026-09-23T18:03:34","modified_gmt":"2026-09-23T10:03:34","slug":"ev-thermal-management-cnc-machining","status":"publish","type":"post","link":"https:\/\/www.jccncmachining.com\/ko\/blog\/ev-thermal-management-cnc-machining\/","title":{"rendered":"\uace0\uc815\uad6c\ub294 \uc798\ubabb\ub41c \uc704\uce58\ub97c \uc644\ubcbd\ud558\uac8c \ubc18\ubcf5\ud560 \uc218 \uc788\ub2e4"},"content":{"rendered":"<article style=\"font-size: 16px; line-height: 1.85;\">An automation fixture can repeat the wrong position perfectly. A rigid CNC-machined nest or end-of-arm tool does not guarantee a capable system if it references a variable surface, over-constrains the part, ignores sensor uncertainty, or deflects under acceleration. Precision must be assigned to the locating chain that connects product, fixture, robot, machine, and inspection\u2014not applied uniformly to the tooling.<\/p>\n<p>This guide separates locating from clamping, accuracy from repeatability, and tool mass from stiffness. It provides a design and RFQ framework for nests, pallets, gauges, grippers, EOAT plates, sensor brackets, and automated assembly fixtures.<\/p>\n<nav class=\"article-toc\" style=\"margin: 28px 0; padding: 22px 26px; border: 1px solid #e4e4e4; border-radius: 8px; background: #fafafa;\" aria-label=\"\ubaa9\ucc28\"><strong style=\"display: block; font-size: 21px; margin-bottom: 10px;\">\ubaa9\ucc28<\/strong><\/p>\n<ol style=\"margin: 0; padding-left: 22px;\">\n<li><a href=\"#locating-chain\">Draw the locating chain<\/a><\/li>\n<li><a href=\"#constraint\">Constrain the part without fighting it<\/a><\/li>\n<li><a href=\"#clamping\">Clamping should hold, not relocate<\/a><\/li>\n<li><a href=\"#eoat-dynamics\">EOAT lives in a moving coordinate system<\/a><\/li>\n<li><a href=\"#sensors-dress\">Sensors, cables, and pneumatics belong in the design<\/a><\/li>\n<li><a href=\"#wear-maintenance\">Design wear into replaceable elements<\/a><\/li>\n<li><a href=\"#verification\">Verify the cell, not only the machined tool<\/a><\/li>\n<li><a href=\"#rfq\">Automation-tooling RFQ package<\/a><\/li>\n<li><a href=\"#faq\">Fixture and EOAT FAQs<\/a><\/li>\n<\/ol>\n<\/nav>\n<section id=\"locating-chain\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Draw the Locating Chain<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-draw-locating-chain-cnc-fixtures-1024x576.webp\" alt=\"draw-locating-chain-cnc-fixtures\" class=\"size-large wp-image-2815 aligncenter\" \/>\nTrace coordinates from the machine or cell base through robot flange, tool plate, gripper, locators, workpiece, process feature, and inspection reference. Mark every joint, adapter, dowel, fastener, calibration transform, and compliant element. The chain reveals where error and deflection accumulate.\n\nDecide whether the fixture establishes product datums or merely supports handling. A camera, probe, or force-control step may compensate for some variation, but it should not mask unstable mechanics. Mechanical repeatability and calibration strategy must be planned together.\n\n<\/section>\n<section id=\"constraint\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Constrain the Part Without Fighting It<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-2-constrain-part-fighting-it-1024x576.webp\" alt=\"constrain-part-fighting-it\" class=\"size-large wp-image-2816 aligncenter\" \/>\nUse a deterministic locating scheme appropriate to the geometry. The familiar principle of constraining degrees of freedom is more important than the number of locator pins. Redundant contacts can rock on variable parts, while insufficient support allows movement under process load.\n\nLocate on stable functional surfaces and allow chips, flash, coating, burrs, or molded variation to escape. Reliefs, replaceable buttons, nests, cones, V-blocks, and compliant elements can accommodate the real incoming part. A perfect CAD contact over a large area may be less repeatable than a small controlled contact set.\n\nMake incorrect loading difficult. Asymmetric locators, presence sensors, keyed interfaces, and clear orientation features reduce automation faults before software must detect them.\n\n<\/section>\n<section id=\"clamping\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Clamping Should Hold, Not Relocate<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-clamping-should-hold-relocate-1024x576.webp\" alt=\"clamping-should-hold-relocate\" class=\"size-large wp-image-2817 aligncenter\" \/>\nApply clamp force toward the locators and supports. Sideways or unbalanced force can slide the workpiece away from its intended datum. Thin, soft, or cosmetic parts may need distributed, limited, or compliant clamping.\n\n\n<table style=\"width: 100%; border-collapse: collapse; margin: 22px 0;\" srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-clamping-should-hold-relocate-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-clamping-should-hold-relocate-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-clamping-should-hold-relocate-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-clamping-should-hold-relocate-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-clamping-should-hold-relocate-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-clamping-should-hold-relocate-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-clamping-should-hold-relocate.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>\n<thead>\n<tr>\n<th style=\"border: 1px solid #ddd; padding: 12px; text-align: left; background: #f3f3f3;\">Observed problem<\/th>\n<th style=\"border: 1px solid #ddd; padding: 12px; text-align: left; background: #f3f3f3;\">Likely tooling cause<\/th>\n<th style=\"border: 1px solid #ddd; padding: 12px; text-align: left; background: #f3f3f3;\">Design response<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Position shifts after clamp<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Force not directed into locators<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Change clamp direction or support<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Part rocks in nest<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Over-constraint or contamination<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Reduce contacts and add relief<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Surface marks vary<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">High local pressure or dirty pads<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Increase contact area and control cleaning<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/section>\n<section id=\"eoat-dynamics\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">EOAT Lives in a Moving Coordinate System<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-4-eoat-lives-in-moving-coordinate-1024x576.webp\" alt=\"eoat-lives-in-moving-coordinate\" class=\"size-large wp-image-2818 aligncenter\" \/>\nEnd-of-arm tooling affects robot payload, center of gravity, inertia, acceleration, reach, collision envelope, and settling time. A thick solid plate may be easy to machine but reduce cell performance. Aggressive pocketing saves mass but can reduce stiffness or create vibration.\n\nPlace mass close to the flange, follow the load path, and evaluate worst-case part weight and orientation. Check deflection under gripping, acceleration, process contact, and emergency stop. Modular interfaces can speed changeover but add joints and stack-up.\n\nMaterial selection balances stiffness-to-mass, wear, crash behavior, corrosion, conductivity, and repair. Aluminum plates with steel or hardened replaceable contacts are common in principle, but the actual design follows duty.\n\n<\/section>\n<section id=\"sensors-dress\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Sensors, Cables, and Pneumatics Belong in the Mechanical Design<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-sensors-cables-pneumatics-belong-in-1024x576.webp\" alt=\"sensors-cables-pneumatics-belong-in\" class=\"size-large wp-image-2819 aligncenter\" \/>\nPresence sensors, pressure switches, proximity targets, cameras, and force devices need protected mounting, adjustment, and calibration access. Their brackets should reference the same functional chain as the feature they detect.\n\nRoute cables and hoses through the full motion envelope. Control bend radius, torsion, strain relief, abrasion, connector access, and snag risk. A fixture that works on a bench can fail after repeated robot movement if dress components pull on the tool or obscure sensors.\n\nDesign service access. Consumables and connectors should be replaceable without dismantling the datum structure or requiring complete recalibration.\n\n<\/section>\n<section id=\"wear-maintenance\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Design Wear Into Replaceable Elements<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-design-wear-replaceable-elements-1024x576.webp\" alt=\"design-wear-replaceable-elements\" class=\"size-large wp-image-2820 aligncenter\" \/>\nLocators, bushings, pads, gripper fingers, seals, and hard stops wear or become damaged. Put wear into removable components with controlled fits and accessible fasteners. Record replacement intervals or condition limits based on cycles and observed drift.\n\nProtect fixture datums during cleaning and maintenance. If a replacement pin can be installed in multiple positions or a pad thickness changes without detection, maintenance can shift the system. Use keyed parts, gauges, or verification routines after service.\n\nThe <a href=\"https:\/\/www.jccncmachining.com\/ko\/%eb%b8%94%eb%a1%9c%ea%b7%b8\/cnc-%ea%b0%80%ea%b3%b5-%ed%92%88%ec%a7%88-%ea%b4%80%eb%a6%ac\/\" srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-design-wear-replaceable-elements-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-design-wear-replaceable-elements-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-design-wear-replaceable-elements-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-design-wear-replaceable-elements-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-design-wear-replaceable-elements-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-design-wear-replaceable-elements-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-design-wear-replaceable-elements.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>CNC \ud488\uc9c8 \uad00\ub9ac<\/a> approach should include fixture status because tooling variation becomes product variation.<\/p>\n<\/section>\n<section id=\"verification\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Verify the Cell, Not Only the Machined Tool<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-7-verify-cell-machined-tool-1024x576.webp\" alt=\"verify-cell-machined-tool\" class=\"size-large wp-image-2821 aligncenter\" \/>\nA dimensional report proves the tool matches its drawing. Cell acceptance should also test loading, repeatability, misload detection, cycle time, sensor function, clamp confirmation, collision clearance, part variation, maintenance access, and recovery after fault.\n\nUse a representative range of parts rather than one ideal sample. Measure output under normal robot speed and process load. If calibration is required, define master artifacts, frequency, responsibility, and change control.\n\nFunctional gauges and capability studies may reveal system behavior that isolated CMM data cannot. Keep mechanical and software revisions linked so a changed locator does not leave an old robot frame in service.\n\n<\/section>\n<section id=\"rfq\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Automation-Tooling RFQ Package<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-automation-tooling-rfq-package-cnc-fixtures-1024x576.webp\" alt=\"automation-tooling-rfq-package-cnc-fixtures\" class=\"size-large wp-image-2822 aligncenter\" \/>\n<ul srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-automation-tooling-rfq-package-cnc-fixtures-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-automation-tooling-rfq-package-cnc-fixtures-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-automation-tooling-rfq-package-cnc-fixtures-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-automation-tooling-rfq-package-cnc-fixtures-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-automation-tooling-rfq-package-cnc-fixtures-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-automation-tooling-rfq-package-cnc-fixtures-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-automation-tooling-rfq-package-cnc-fixtures.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>\n<li>Cell layout, robot model, flange, payload, reach, and motion<\/li>\n<li>Part family, variation, datums, surfaces, and allowable contact<\/li>\n<li>Process loads, cycle target, environment, and expected life<\/li>\n<li>Locating, clamping, sensors, pneumatics, cable dress, and safety concept<\/li>\n<li>Changeover, maintenance, spare parts, and crash-recovery needs<\/li>\n<li>Tool drawing inspection and cell-level acceptance tests<\/li>\n<li>Ownership of design files, programs, masters, and replacement details<\/li>\n<\/ul>\n<p>This system view extends the parent <a href=\"https:\/\/www.jccncmachining.com\/ko\/%eb%b8%94%eb%a1%9c%ea%b7%b8\/cnc-%ea%b0%80%ea%b3%b5-%ec%9d%91%ec%9a%a9-%eb%b6%84%ec%95%bc\/\">CNC \uac00\uacf5 \uc751\uc6a9 \ubd84\uc57c<\/a> article into automation tooling.<\/p>\n<\/section>\n<section id=\"faq\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Fixture and EOAT FAQs<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-fixtures-eoat-engineering-questions-1024x576.webp\" alt=\"cnc-fixtures-eoat-engineering-questions\" class=\"size-large wp-image-2823 aligncenter\" \/>\n<h3 style=\"font-size: 22px; line-height: 1.4; margin: 26px 0 10px;\" srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-fixtures-eoat-engineering-questions-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-fixtures-eoat-engineering-questions-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-fixtures-eoat-engineering-questions-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-fixtures-eoat-engineering-questions-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-fixtures-eoat-engineering-questions-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-fixtures-eoat-engineering-questions-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-fixtures-eoat-engineering-questions.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>Should every locator be tightly toleranced?<\/h3>\n<p>No. Tolerances should support the locating chain and replaceability. Overly tight nonfunctional dimensions add cost without improving cell repeatability.<\/p>\n<h3 style=\"font-size: 22px; line-height: 1.4; margin: 26px 0 10px;\">Can robot calibration correct a flexible tool?<\/h3>\n<p>Calibration can correct repeatable geometric offset, not variable deflection, wear, loose joints, or changing load. Mechanical stability remains necessary.<\/p>\n<h3 style=\"font-size: 22px; line-height: 1.4; margin: 26px 0 10px;\">When should hardened inserts be used?<\/h3>\n<p>Use them where wear, impact, sliding, or frequent replacement justifies a harder contact. Their fit, retention, replacement method, and effect on the datum must be designed.<\/p>\n<\/section>\n<aside aria-label=\"Automation lifecycle note\">\n<h3 style=\"font-size: 22px; line-height: 1.4; margin: 26px 0 10px;\">Design for changeover, crashes, and service<\/h3>\n<p>Changeover design should separate settings operators may adjust from datums that must remain controlled. Use keyed modules, hard stops, captured fasteners, identification, and verification features so a product-family change does not rebuild the coordinate system. Record expected changeover time under normal floor conditions.<\/p>\n<p>Crash recovery deserves an engineered procedure. Define sacrificial elements, mechanical stops, inspection points, master checks, and criteria for returning the cell to service. Recalibrating the robot alone can hide bent fingers, shifted locators, and loose joints behind a software offset.<\/p>\n<p>Commissioning should challenge the fixture with expected part variation, dirty-contact scenarios, payload extremes, fault recovery, and repeated cycling. Observe operator access and stored energy during jam clearing. Guarding, pneumatic isolation, pinch points, and lifting provisions are part of tooling design.<\/p>\n<p>Replacement fingers, pins, pads, sensors, and seals should carry controlled drawings and revision identity. After installation, a concise verification routine should prove the functional locating chain is restored.<\/p>\n<\/aside>\n<aside aria-label=\"Fixture acceptance controls\">\n<h3 style=\"font-size: 22px; line-height: 1.4; margin: 26px 0 10px;\">Acceptance must reproduce cell behavior<\/h3>\n<p>Fixture inspection should establish locator position, interface geometry, replacement-part fits, and relevant stiffness, but static dimensions alone do not prove operation. Repeat loading and unloading with representative parts, measure resulting workpiece position, and challenge the system across allowed incoming variation. Include warm-up and sustained cycling if temperature affects the structure.<\/p>\n<p>Sensor logic should be verified against real failure modes: missing part, doubled part, incomplete seating, wrong orientation, lost grip, low pressure, and damaged locator. A sensor that changes state in a demonstration may still have poor margin or an adjustable bracket that drifts. Record target distance, switching window, and protected calibration method.<\/p>\n<p>For modular tooling, create an interface control document covering flange pattern, datums, utility connections, payload assumptions, software identity, and verification method. This allows future fingers or nests to be produced without reverse engineering the original assembly.<\/p>\n<p>Maintenance records should connect observed wear with product or cell performance. Trending locator replacement, clamp leakage, sensor adjustment, and recovery events helps schedule service before repeatability degrades and informs the next tooling revision.<\/p>\n<\/aside>\n<\/article>","protected":false},"excerpt":{"rendered":"<p>An automation fixture can repeat the wrong position perfectly. A rigid CNC-machined nest or end-of-arm tool does not guarantee a capable system if it references a variable surface, over-constrains the part, ignores sensor uncertainty, or deflects under acceleration. Precision must be assigned to the locating chain that connects product, fixture, robot, machine, and inspection\u2014not applied [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":2824,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-2636","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"_links":{"self":[{"href":"https:\/\/www.jccncmachining.com\/ko\/wp-json\/wp\/v2\/posts\/2636","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.jccncmachining.com\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.jccncmachining.com\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.jccncmachining.com\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.jccncmachining.com\/ko\/wp-json\/wp\/v2\/comments?post=2636"}],"version-history":[{"count":14,"href":"https:\/\/www.jccncmachining.com\/ko\/wp-json\/wp\/v2\/posts\/2636\/revisions"}],"predecessor-version":[{"id":2825,"href":"https:\/\/www.jccncmachining.com\/ko\/wp-json\/wp\/v2\/posts\/2636\/revisions\/2825"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.jccncmachining.com\/ko\/wp-json\/wp\/v2\/media\/2824"}],"wp:attachment":[{"href":"https:\/\/www.jccncmachining.com\/ko\/wp-json\/wp\/v2\/media?parent=2636"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.jccncmachining.com\/ko\/wp-json\/wp\/v2\/categories?post=2636"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.jccncmachining.com\/ko\/wp-json\/wp\/v2\/tags?post=2636"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}