{"id":2604,"date":"2026-09-26T11:28:50","date_gmt":"2026-09-26T03:28:50","guid":{"rendered":"https:\/\/www.jccncmachining.com\/?p=2604"},"modified":"2026-09-23T18:01:52","modified_gmt":"2026-09-23T10:01:52","slug":"cnc-machining-vs-injection-molding","status":"publish","type":"post","link":"https:\/\/www.jccncmachining.com\/de\/blog\/cnc-machining-vs-injection-molding\/","title":{"rendered":"CNC oder Spritzguss? Nicht zu fr\u00fch Werkzeuge anschaffen"},"content":{"rendered":"<article style=\"font-size: 16px; line-height: 1.85;\">CNC machining and injection molding do not compete at the same stage of every plastic project. Machining is usually the safer route while geometry, material, quantity, or acceptance criteria are still moving. Injection molding becomes more attractive when the design is stable enough to justify mold decisions and repeat demand can spread that tooling investment. The important question is not simply which process has the lower unit price. It is whether the project is ready to exchange design flexibility for production efficiency.<\/p>\n<p>A rushed mold can lock draft, wall thickness, gate location, ejector strategy, shrinkage assumptions, and cosmetic expectations into expensive steel. Staying with CNC too long can also waste money when every repeat part consumes machine time and stock. This guide uses three project clocks\u2014design, cash, and quality\u2014to decide when to machine plastic parts, when to mold them, and what must change before a clean process transfer.<\/p>\n<nav class=\"article-toc\" style=\"margin: 28px 0; padding: 22px 26px; border: 1px solid #e4e4e4; border-radius: 8px; background: #fafafa;\" aria-label=\"Inhaltsverzeichnis\"><strong style=\"display: block; font-size: 21px; margin-bottom: 10px;\">Inhaltsverzeichnis<\/strong><\/p>\n<ol style=\"margin: 0; padding-left: 22px;\">\n<li><a href=\"#three-clocks\">Three clocks control the decision<\/a><\/li>\n<li><a href=\"#part-not-identical\">The same CAD file does not create the same part<\/a><\/li>\n<li><a href=\"#cost-curve\">Read the whole cost curve<\/a><\/li>\n<li><a href=\"#design-transfer\">Design changes before molding<\/a><\/li>\n<li><a href=\"#material-evidence\">Material evidence can mislead<\/a><\/li>\n<li><a href=\"#tolerance-appearance\">Tolerance and appearance need zones<\/a><\/li>\n<li><a href=\"#transition-gates\">Five gates before releasing tooling<\/a><\/li>\n<li><a href=\"#rfq-two-routes\">Quote both routes without false equivalence<\/a><\/li>\n<li><a href=\"#faq\">Practical FAQs<\/a><\/li>\n<\/ol>\n<\/nav>\n<section id=\"three-clocks\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Three Clocks Control the Decision<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-three-clocks-control-decision-1024x576.webp\" alt=\"three-clocks-control-decision\" class=\"size-large wp-image-2673 aligncenter\" \/>\nThe design clock measures how quickly the CAD model and drawing are changing. If interfaces, wall sections, fastening, or user feedback are unresolved, machining allows revisions without altering a production mold. The cash clock measures when up-front tooling can be justified by credible demand. The quality clock measures when the team understands which dimensions, surfaces, material properties, and process records must remain stable from lot to lot.\n\nThese clocks rarely reach zero together. A sales forecast may justify tooling while the design is still immature. A technically stable part may have uncertain demand. A mold may be ordered before inspection datums are agreed. The best route follows the slowest clock. CNC machining can serve as a controlled bridge when one condition is not ready, while molding should begin only when the remaining uncertainty is small enough to manage through tool trials and validation.\n\n\n<table style=\"width: 100%; border-collapse: collapse; margin: 22px 0;\" srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-three-clocks-control-decision-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-three-clocks-control-decision-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-three-clocks-control-decision-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-three-clocks-control-decision-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-three-clocks-control-decision-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-three-clocks-control-decision-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-1-three-clocks-control-decision.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>\n<thead>\n<tr>\n<th style=\"border: 1px solid #ddd; padding: 12px; text-align: left; background: #f3f3f3;\">Project signal<\/th>\n<th style=\"border: 1px solid #ddd; padding: 12px; text-align: left; background: #f3f3f3;\">Stay with CNC<\/th>\n<th style=\"border: 1px solid #ddd; padding: 12px; text-align: left; background: #f3f3f3;\">Prepare for molding<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Revision activity<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Critical geometry still changes after tests.<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Interfaces and functional dimensions are frozen.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Demand<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Quantity is uncertain or released in small batches.<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Forecast and product life support tooling.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Quality plan<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Tests are still identifying critical characteristics.<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Datums, limits, cosmetics, and inspection are defined.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Material<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">Stock material is needed for functional learning.<\/td>\n<td style=\"border: 1px solid #ddd; padding: 12px;\">A moldable grade and processing window are selected.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/section>\n<section id=\"part-not-identical\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">The Same CAD File Does Not Create the Same Part<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-2-same-cad-file-does-create-1024x576.webp\" alt=\"same-cad-file-does-create\" class=\"size-large wp-image-2665 aligncenter\" \/>\nA machined plastic part is cut from sheet, plate, rod, or another solid stock form. Its walls can vary freely where tools have access, and sharp external details or deep local sections may be possible without considering polymer flow. An injection-molded part is formed as melt fills a cavity, cools, shrinks, and is ejected. Wall transitions, ribs, bosses, draft, gate position, weld lines, sink, and ejection all influence the result.\n\nThat means a machined prototype is not automatically a mold simulation. It can prove packaging, assembly, basic load paths, hole locations, and many functional interfaces. It cannot reproduce every molded residual stress, fiber orientation, knit line, shrinkage pattern, surface texture, or gate-related effect. Engineers should mark which findings are process-independent and which must be confirmed during molding trials.\n\nThe reverse problem also matters. A design created around molding may be inefficient to machine because thin ribs, deep pockets, and uniform shells require extensive material removal. During the CNC phase, temporary simplifications may reduce cost, but they should be documented so the final molded design does not inherit machining compromises that serve no production purpose.\n\n<\/section>\n<section id=\"cost-curve\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Read the Whole Cost Curve, Not One Unit Price<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-3-read-whole-cost-curve-one-1024x576.webp\" alt=\"read-whole-cost-curve-one\" class=\"size-large wp-image-2666 aligncenter\" \/>\nCNC cost begins with programming, setup, stock, cutting time, tools, inspection, and finishing. Repeated orders can reuse process knowledge and sometimes fixtures, but each part continues to consume machine capacity. Injection molding moves much of the cost forward into mold design, mold manufacture, sampling, correction, and validation. Once the process is stable, cycle economics can favor repeat production.\n\nThere is no universal crossover quantity. A simple small component with a straightforward mold behaves differently from a large cosmetic housing with slides, inserts, texture, tight shutoffs, and demanding validation. Material utilization, cavities, cycle time, anticipated tool life, maintenance, scrap, secondary operations, packaging, and engineering changes all affect the result.\n\nCompare total approved cost over the expected product life. Include the cost of design changes and the commercial impact of waiting for tooling. If CNC parts allow pilot sales, field tests, certification work, or assembly-line development while the mold is being completed, their higher piece price may purchase valuable schedule protection.\n\n<\/section>\n<section id=\"design-transfer\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">A Machined Design Usually Needs a Molding Translation<\/h2>\n<p>Moving from CNC to molding is not a file-format conversion. Review wall thickness, transitions, ribs, boss proportions, draft, undercuts, parting direction, gate options, venting, ejector access, cosmetic faces, and expected shrinkage. Decide whether metal inserts, snap fits, living hinges, threads, or post-mold machining belong in the production route.<\/p>\n<p>Functional datums deserve special attention. A machined prototype may reference a flat stock surface that will not exist naturally after molding. A molded part may need locating pads, controlled interfaces, or post-machined features to create reliable assembly references. A DFM review should therefore connect mold behavior to the drawing rather than treating the drawing and tool as separate documents.<\/p>\n<p>Keep a transition register: list each prototype feature, how it was made, what it proved, how molding changes it, and what must be retested. This simple record prevents a successful CNC sample from becoming false evidence for an unvalidated molded detail.<\/p>\n<\/section>\n<section id=\"material-evidence\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Material Names Can Hide Different Evidence<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-material-names-can-hide-different-1024x576.webp\" alt=\"material-names-can-hide-different\" class=\"size-large wp-image-2667 aligncenter\" \/>\nStock and molding grades within the same polymer family may differ in molecular weight, reinforcement, additives, colorants, flame-retardant packages, moisture condition, or processing history. Fiber-filled materials may show directional behavior after molding that a machined stock sample does not reproduce. Transparent, wear-resistant, chemically exposed, or dimensionally sensitive applications require especially careful grade comparison.\n\nDefine the property being tested. If the objective is stiffness, creep, impact, sterilization resistance, dielectric behavior, wear, or chemical compatibility, confirm whether the machined stock is a valid proxy. The broader <a href=\"https:\/\/www.jccncmachining.com\/de\/blog\/cnc-bearbeitungsmaterialien\/\" srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-material-names-can-hide-different-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-material-names-can-hide-different-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-material-names-can-hide-different-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-material-names-can-hide-different-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-material-names-can-hide-different-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-material-names-can-hide-different-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-5-material-names-can-hide-different.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>CNC-Bearbeitungsmaterialien<\/a> guide helps frame stock selection, but the molding supplier must still confirm the production resin and processing implications.<\/p>\n<\/section>\n<section id=\"tolerance-appearance\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Tolerance and Appearance Need Functional Zones<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-6-tolerance-appearance-need-functional-zones-1024x576.webp\" alt=\"tolerance-appearance-need-functional-zones\" class=\"size-large wp-image-2668 aligncenter\" \/>\nMachining can efficiently control accessible bores, faces, slots, and hole patterns, but forcing the same limits onto every molded surface can create an expensive and unstable specification. Separate critical assembly interfaces from nonfunctional envelope dimensions. For molded production, account for cavity layout, shrinkage, warpage, parting lines, gate vestige, ejector marks, and cosmetic classification.\n\nAppearance should also be translated. A polished or bead-blasted machined prototype may communicate design intent but will not exactly predict molded texture, gloss, flow marks, knit lines, or color variation. Create an appearance specification with named zones and approved references instead of relying on the prototype alone.\n\nWhere a molded component still needs precision holes, sealing lands, or other controlled interfaces, a hybrid route may use molding for the body and machining for selected features. The drawing must identify the condition before and after secondary machining so inspection results remain unambiguous.\n\n<\/section>\n<section id=\"transition-gates\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Five Gates Before Releasing Tooling<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-7-five-gates-releasing-tooling-1024x576.webp\" alt=\"five-gates-releasing-tooling\" class=\"size-large wp-image-2669 aligncenter\" \/>\n<ol srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-7-five-gates-releasing-tooling-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-7-five-gates-releasing-tooling-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-7-five-gates-releasing-tooling-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-7-five-gates-releasing-tooling-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-7-five-gates-releasing-tooling-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-7-five-gates-releasing-tooling-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-7-five-gates-releasing-tooling.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>\n<li><strong>Design gate:<\/strong> critical geometry, interfaces, and change authority are frozen.<\/li>\n<li><strong>Material gate:<\/strong> the intended molding grade is selected and test gaps versus machined stock are documented.<\/li>\n<li><strong>Manufacturing gate:<\/strong> draft, wall strategy, gating, ejection, undercuts, and secondary operations have been reviewed.<\/li>\n<li><strong>Quality gate:<\/strong> datums, critical dimensions, cosmetic zones, sampling, and acceptance records are agreed.<\/li>\n<li><strong>Commercial gate:<\/strong> forecast, tool ownership, maintenance, expected life, engineering-change terms, and contingency supply are clear.<\/li>\n<\/ol>\n<p>Failure at one gate does not always stop development. It may justify another machined batch targeted at the unresolved risk. This is where the <a href=\"https:\/\/www.jccncmachining.com\/de\/blog\/cnc-machining-prototyping-production\/\">prototype-to-production<\/a> plan becomes more useful than a simple per-part comparison.<\/p>\n<\/section>\n<section id=\"rfq-two-routes\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Quote Both Routes Without Creating False Equivalence<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-quote-both-routes-creating-false-1024x576.webp\" alt=\"quote-both-routes-creating-false\" class=\"size-large wp-image-2670 aligncenter\" \/>\nSend the same revision, functional requirements, target material properties, quantities, finish expectations, inspection level, and delivery milestones. Then allow each supplier to state process-specific assumptions. For CNC, ask about stock form, setups, tool access, and reusable workholding. For molding, ask about tool construction, cavities, shrink assumptions, samples, corrections, maintenance, and secondary operations.\n\nDo not compare a fully inspected machined part with an unvalidated molded estimate, or a production mold with a temporary prototype tool, as though they are identical offers. Normalize what is included, identify excluded risk, and model likely design changes. This is the practical way to evaluate the <a href=\"https:\/\/www.jccncmachining.com\/de\/blog\/cnc-machining-advantages-disadvantages\/\" srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-quote-both-routes-creating-false-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-quote-both-routes-creating-false-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-quote-both-routes-creating-false-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-quote-both-routes-creating-false-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-quote-both-routes-creating-false-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-quote-both-routes-creating-false-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-8-quote-both-routes-creating-false.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>advantages and disadvantages of CNC machining<\/a> against molding rather than declaring one process universally better.<\/p>\n<p>Ask both suppliers to identify what happens after a failed first sample. For machining, the response may involve a program, tool, fixture, or drawing change. For molding, diagnosis may involve the tool, process window, resin condition, cooling, gate behavior, or part design. The quotation should distinguish included sampling loops from chargeable engineering changes so a low initial price does not hide an undefined approval path.<\/p>\n<p>Packaging and handling should also match the surface and dimensional requirements. Machined prototypes may be individually protected, while molded production may move through automated handling or bulk packaging. Cosmetic scuffing, moisture uptake, deformation under stacking, and mixed-cavity traceability can become production issues even when individual samples pass.<\/p>\n<\/section>\n<section id=\"faq\">\n<h2 style=\"font-size: 28px; line-height: 1.3; margin: 42px 0 18px;\">Practical FAQs<\/h2>\n<p><img decoding=\"async\" width=\"1024\" height=\"576\" loading=\"lazy\" src=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-machining-injection-engineering-questions-1024x576.webp\" alt=\"cnc-machining-injection-engineering-questions\" class=\"size-large wp-image-2671 aligncenter\" \/>\n<h3 style=\"font-size: 22px; line-height: 1.4; margin: 26px 0 10px;\" srcset=\"https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-machining-injection-engineering-questions-1024x576.webp 1024w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-machining-injection-engineering-questions-300x169.webp 300w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-machining-injection-engineering-questions-768x432.webp 768w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-machining-injection-engineering-questions-1536x864.webp 1536w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-machining-injection-engineering-questions-18x10.webp 18w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-machining-injection-engineering-questions-800x450.webp 800w, https:\/\/www.jccncmachining.com\/wp-content\/uploads\/2026\/09\/h2-9-cnc-machining-injection-engineering-questions.webp 1600w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/>Can CNC-machined plastic parts be used for regulatory testing?<\/h3>\n<p>Only when the test authority and engineering team accept the material and process as representative. Document differences in grade, processing history, additives, geometry, and surface condition. Some tests evaluate the design; others evaluate the production material and process, so the answer depends on the evidence required.<\/p>\n<h3 style=\"font-size: 22px; line-height: 1.4; margin: 26px 0 10px;\">Should every machined prototype be redesigned before molding?<\/h3>\n<p>Not every feature needs to change, but every part should receive a molding DFM review. Tool access limitations disappear while flow, cooling, shrinkage, draft, and ejection constraints appear. The production design should reflect those new constraints deliberately.<\/p>\n<h3 style=\"font-size: 22px; line-height: 1.4; margin: 26px 0 10px;\">Can machining continue after the mold is released?<\/h3>\n<p>Yes. CNC can provide bridge quantities, support engineering changes, replace delayed molded parts, and machine critical features after molding. Revision control must keep temporary machined parts distinguishable from production molded parts.<\/p>\n<h3 style=\"font-size: 22px; line-height: 1.4; margin: 26px 0 10px;\">What is the biggest warning sign that tooling is premature?<\/h3>\n<p>Frequent changes to functional interfaces are the clearest warning. Cosmetic refinements may be manageable, but moving datums, mating geometry, load paths, sealing features, or material requirements can force significant tool rework.<\/p>\n<\/section>\n<\/article>","protected":false},"excerpt":{"rendered":"<p>CNC machining and injection molding do not compete at the same stage of every plastic project. Machining is usually the safer route while geometry, material, quantity, or acceptance criteria are still moving. Injection molding becomes more attractive when the design is stable enough to justify mold decisions and repeat demand can spread that tooling investment. [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":2672,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-2604","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"_links":{"self":[{"href":"https:\/\/www.jccncmachining.com\/de\/wp-json\/wp\/v2\/posts\/2604","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.jccncmachining.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.jccncmachining.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.jccncmachining.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.jccncmachining.com\/de\/wp-json\/wp\/v2\/comments?post=2604"}],"version-history":[{"count":11,"href":"https:\/\/www.jccncmachining.com\/de\/wp-json\/wp\/v2\/posts\/2604\/revisions"}],"predecessor-version":[{"id":2674,"href":"https:\/\/www.jccncmachining.com\/de\/wp-json\/wp\/v2\/posts\/2604\/revisions\/2674"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.jccncmachining.com\/de\/wp-json\/wp\/v2\/media\/2672"}],"wp:attachment":[{"href":"https:\/\/www.jccncmachining.com\/de\/wp-json\/wp\/v2\/media?parent=2604"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.jccncmachining.com\/de\/wp-json\/wp\/v2\/categories?post=2604"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.jccncmachining.com\/de\/wp-json\/wp\/v2\/tags?post=2604"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}